Tips On Maintaining Hydraulic System Of Wheel Loaders

One of the most important parts of the wheel loader is the hydraulic filters system because a small failure for it can affect its overall performance. For this reason, appropriate maintenance and maintenance is needed to ensure longer life life and maximum performance and system reliability. Therefore it is very important to find out how to maintain a hydraulic system correctly for a constant maximum efficiency of the loader.

Maintenance of the right hydraulic system and routine not only extends service life and increases efficiency but also prevents frequent and premature engine damage, as a result saving services and repair costs. But it is important to be familiar and have an appropriate understanding of loaders such as performance, service conditions, structure and working conditions before doing any maintenance work on it.

The first 6 months after the purchase of a new loader is very important to determine the next service. During this period, routine checks must be carried out because it is very important depending on the work it does. You must check and always pay close attention and specifically to problems such as loose connections, attachments installed, Oli conditions eg. Oil temperature and environment and service conditions.

The following check must be done every day. Check if there is enough oil in the hydraulic system and also for normal oil temperatures to be careful not to operate at high temperatures. There should be no source of oil leakage in the system, as well as damaged or distorted pipes because it can cause leakage and overall damage. Check loose pipe connections or loose connections in the area being bolted.

Oil or ptfe filters must also be checked for any blockage. The temperature of the hydraulic pump must be checked and the condition of the motor and the presence of abnormal noise. All instruments such as pressure gauges and thermometers must be checked for all forms of damage. You need to do a trial of the entire hydraulic system to ensure no problems are missed during the inspection.

Examination and test on the engine should not only be done before the engine is used to work but also after being used for several hours. Maintenance services after work on the machine include a binder and replacement of regular sealing elements, regular replacement and cleaning of different hydraulic parts, replacing filter elements and cleaning fuel tanks and pipes and changing oil in the system. These are some general maintenance tips that involve a hydraulic system in the wheel loader.